The mobile power test system has QC2.0, QC3.0, MTK2.0, Type-C fast charge and fast discharge test functions as well as wireless charging test function.
The mobile power test system is suitable for the comprehensive performance testing of finished and semi-finished products of mobile power sources and power banks!
-
The mobile power test system has a comprehensive range of test items, including charge testing, overcurrent protection testing, short-circuit protection testing, and static current testing functions;
-
The mobile power test system has QC2.0, QC3.0, MTK2.0, Type-C fast charge and fast discharge test functions as well as wireless charging test function.
The advantages of the mobile power test system are as follows:
- It has testing functions such as charge testing, overcurrent protection testing, short-circuit protection testing, and static current testing.
- It has QC2.0, QC3.0, MTK2.0, Type-C fast charge and fast discharge test functions as well as wireless charging test function.
- It features an open architecture software platform.
- It supports instruments with GPIB/USB/RS-232 to 485 interface conversion.
- It integrates ATE and HIPOT into one combined test, saving one workstation, greatly reducing costs and improving production capacity!
Test Items of Top-Smart 1300E Mobile Power Supply Testing System:
| Input test | Charge test |
| Input voltage ramp | Charge current test |
| Input freq. ramp | Full charge testing |
| AC cycle drop out | slow charge test |
| Input power supply distortion mode | Slow Charge ID setting test |
| Input RMS current | Discharge while charge test |
| input power | Electricity indication test |
| Input power factor | Simulation battery function |
| Input peak current test | Wireless charging test |
| Output test | Timing / dynamic test |
| DC output voltage | Turn ON time |
| DC output current | Rise time |
| Power up sequence | Fall time |
| Power off sequence | Hold-up time |
| Tracking | Special test |
| Efficiency test | LED lamp voltage and status test |
| Overshoot voltage test | LED flashing frequency test |
| Peak-Peak noise | Sleep mode test |
| Stability test | D + / D-voltage test |
| Voltage regulation | MCU communication and calibration tests |
| Current regulation | Discharge test |
| Mixed effect test | GPIB read/write |
| Protection test | USB read/write |
| Short circuit test | RS232 read / write |
| OV protection | TTL signal control |
| UV protection | Relay control |
| Charge protection test | Bar code scan |
| Discharge protection test | Extended measurement function |
| Overcurrent protection test | |
| Fast charge test(Applicable to QC2.0, QC3.0 and other fast charge test) | |
